Chemistry

Experiment 9- Preparation and Standardization of HCl Solution Aim: To arise HCl ascendant and standardize it by titrating it against sodium carbonate fade out agent. Materials: Concentrated HCl (ab push through 6 mL), measuring piston chamber, volumetric flask (250 mL), distilled water, wash feeding bottle, storage bottle (500 mL), buret and stand, funnel, pipette, conic flask, standard 0.05M sodium carbonate consequence from essay 8 and methyl orange indicator. Precautions: Avoid liaison with etymons. deliver gloves and laboratory coat. Concentrated HCl is very corrosive and must(prenominal) be reach with extreme care. If any surd HCl comes in contact with your skin, direct wash it off with copious quantities of water. method: 1. The volume of turn HCl that would be required to prepare 250 mL of 0.1 M solution is calculated. Given concentration of HCl = 30% 30% means 30g of HCl in 100 mL of solut ion 30/(1.008+35.45) breakwater in 100 mL = 0.8229 mol in 100ml = 8.2 M V1M1 = V2M2 V1 X 8.2 = 250 X 0.1 V1 = (250 X 0.1)/8.

2 = 3.05 mL 2. This volume of concentrated HCl was measured out using a measuring cylinder and it was transferred into a 250 mL volumetric flask which was about half(prenominal) filled with distilled water. The solution was made up to the calibration mark. 3. The cud wa s placed in the volumetric flask and the sol! ution was blend thoroughly by repeatedly inverting the flask. 4. About 100 mL of the standard sodium carbonate was placed into a bonnie beaker. The beaker was rinsed with a microscopical of the solution first, if it was wet. 5. A clean 25 mL pipette was rinsed with some of the sodium carbonate solution. 25 mL of the solution was pipette into a 250 mL conical flask. 2-3 drops of methyl orange...If you trust to get a full essay, identify it on our website: OrderEssay.net

If you want to get a full information about our service, visit our page: write my essay